Clonezilla Live on USB flash drive or USB hard drive |
Free download BOOT.ELF HDLoader untuk ps2 hardisk yang berfungsi untuk BOOTING /untuk mengatasi ps2 layar merah/hitam setelah logo matrix selain itu berfungsi menampilkan gamelist/judul permainan Silahkan teman teman download di:SINI GERATIS.
Some machine, e.g. Asus Eee PC or Acer Aspire One, comes without CD/DVD drive. In this case, an USB flash drive or USB hard drive is the best way to boot Clonezilla live. You can follow the following to make a bootable Clonezilla live USB flash drive or hard drive using either MS Windows or GNU/Linux.
Requirement:
- Microsoft Windows 2000/XP/Vista/7, or GNU/Linux.
- Internet access for downloading a distribution to install, or a pre-downloaded ISO file.
- An USB drive with a FAT or NTFS partition. If you are making this bootable USB flash drive on GNU/Linux, more file systems, including ext[2-4],btrfs,xfs,ufs,ffs can be used for the USB flash drive.
USB setup with MS Windows
Choose one of the following methods to setup Clonezilla Live on your USB flash drive using MS Windows:
MS Windows Method A: Tuxboot
- Download Tuxboot on your MS Windows computer.
- From MS Windows, run the Tuxboot program and follow the instructions in the GUI to install Clonezilla Live on your USB flash drive.
MS Windows Method B: Manual
WARNING! DO NOT RUN makeboot.bat from your local hard drive! Doing so could cause your MS windows not to boot!!! |
![How to play ps2 games from usb without free mcboot How to play ps2 games from usb without free mcboot](http://4.bp.blogspot.com/-uoUgpQp7gn0/T99Q8YARx_I/AAAAAAAACPI/10_z1_90uGk/s1600/8.png)
- Download the Clonezilla Live zip file.
- If you already have a partition of at least 200 MB in size on your USB flash drive formatted with a FAT or NTFS file system then skip to the next step (3).
Otherwise create at least a 200 MB partition on your USB flash drive and format it with a FAT16/FAT32 or NTFS file system. - Extract all the contents of the zip file to the FAT16/FAT32 or NTFS partition on your USB flash drive. Keep the directory architecture, for example, file 'GPL' should be in the USB flash drive's top directory (e.g. G:GPL).
- Browse to your USB flash drive and as an administrator, (On the USB flash key, create a shortcut to the makeboot.bat file. Then right-clic on the shortcut, Properties, Advanced and check 'Run as administrator'.), click the makeboot.bat in the dir utilswin32 (for 32-bit Windows) or makeboot64.bat in the dir utilswin64 (for 64-bit Windows). WARNING! Makeboot.bat must be run from your USB flash drive.
If you are an experienced user, open a command prompt as Administrator, navigate to the root of the USB flash key and enter utilswin32makeboot or utilswin64makeboot, depending on the flavor of Windows you are running. - Follow the on-screen instructions.
(PS: The above description is modified from: http://www.pendrivelinux.com/2007/01/02/all-in-one-usb-dsl. Thanks to PDLA from http://pendrivelinux.com)
MS Windows Method C: Unetbootin (Not Recommended)
![Download Download](/uploads/1/2/6/3/126340381/261843247.webp)
- If you already have Unetbootin installed on your computer then skip to the next step (2).
Otherwise download and install Unetbootin on your MS Windows computer. - Download the Clonezilla Live iso file.
- From MS Windows, run the Unetbootin program and follow the instructions in the GUI to install Clonezilla Live on your USB flash drive.
NOTE: The boot menu created by Unetbootin is not exactly the same as the boot menu created in method A. Therefore it is recommended to use method A.
Windows Method D: LinuxLive USB Creator
- If you already have LinuxLive USB Creator installed on your computer then skip to the next step (2).
Otherwise download and install LinuxLive USB Creator on your MS Windows computer. - Download the Clonezilla Live iso file.
- From Windows, install then run the LinuxLive USB Creator program and follow the instructions in the GUI to install Clonezilla Live on your USB flash drive.
MS Windows Method E: Rufus USB Creator
- If you already have Rufus installed on your computer then skip to the next step (2).
Otherwise download and install Rufus on your MS Windows computer. - Download the Clonezilla Live iso file.
- From MS Windows, run the Rufus program and follow the instructions in the GUI to install Clonezilla Live on your USB flash drive.
USB setup with GNU/Linux
Choose one of the following methods to setup Clonezilla Live on your USB flash drive using GNU/Linux:
GNU/Linux Method A: Tuxboot
- Download Tuxboot on your GNU/Linux computer.
- From GNU/Linux, follow the instructions and the GUI to run Tuxboot to install Clonezilla Live on your USB flash drive.
GNU/Linux Method B: Manual
WARNING! Confirm you have the correct path name before executing commands! Failure to do so could cause loss of data or your GNU/Linux not to boot!!! /dev/sdd is a device path name /dev/sdd1 is a partition path name |
- Download the Clonezilla Live zip file.
- If you already have a FAT or NTFS partition on your USB flash drive then skip to the next step (3).
Otherwise prepare at least a 200 MB partition formatted with either a FAT16/FAT32 or NTFS file system.
If the USB flash drive or USB hard drive does not have any partition, you can use a partitioning tool (e.g. gparted, parted, fdisk, cfdisk or sfdisk) to create a partition with a size of 200 MB or more.
Here we assume your USB flash drive or USB hard drive is /dev/sdd (You have to comfirm your device name, since it's _NOT_ always /dev/sdd) on your GNU/Linux, so the partition table is like: Then format the partition as FAT with a command such as 'mkfs.vfat -F 32 /dev/sdd1'
WARNING! Executing the mkfs.vfat command on the wrong partition or device could cause your GNU/Linux not to boot. Be sure to confirm the command before you run it. - Insert your USB flash drive or USB hard drive into the USB port on your Linux machine and wait a few seconds. Next, run the command 'dmesg' to query the device name of the USB flash drive or USB hard drive. Let's say, for example, that you find it is /dev/sdd1. In this example, we assume /dev/sdd1 has FAT filesystem, and it is automatically mounted in dir /media/usb/. If it's not automatically mounted, manually mount it with commands such as 'mkdir -p /media/usb; mount /dev/sdd1 /media/usb/'.
- Unzip all the files and copy them into your USB flash drive or USB hard drive. You can do this with a command such as: 'unzip clonezilla-live-2.4.2-32-i686-pae.zip -d /media/usb/'). Keep the directory architecture, for example, file 'GPL' should be in the USB flash drive or USB hard drive's top directory (e.g. /media/usb/GPL).
- To make your USB flash drive bootable, first change the working dir, e.g. 'cd /media/usb/utils/linux', then run 'bash makeboot.sh /dev/sdd1' (replace /dev/sdd1 with your USB flash drive device name), and follow the prompts.
WARNING! Executing makeboot.sh with the wrong device name could cause your GNU/Linux not to boot. Be sure to confirm the command before you run it.
NOTE: There is a known problem if you run makeboot.sh on Debian Etch, since the program utils/linux/syslinux does not work properly. Make sure you run it on newer GNU/Linux, such as Debian Lenny, Ubuntu 8.04, or Fedora 9.
TIP: If your USB flash drive or USB hard drive is not able to boot, check the following:
|
GNU/Linux Method C: Unetbootin (Not Recommended)
- If you already have Unetbootin installed on your computer then skip to step 2.
Otherwise install Unetbootin on your GNU/Linux computer. - Download the Clonezilla Live iso file.
- From GNU/Linux, run the Unetbootin program and follow the instructions in the GUI to install Clonezilla Live on your USB flash drive.
NOTE: The boot menu created by Unetbootin is not exactly the same as the boot menu created in method A. Therefore it is recommended to use method A.
Developer | Sony Computer Entertainment |
---|---|
OS family | Unix-like |
Working state | Discontinued |
Initial release | 2002; 18 years ago |
Platforms | PlayStation 2 SCPH-50000 and earlier |
Kernel type | Monolithic (Linux kernel) |
Default user interface | Window Maker |
Official website | web.archive.org/web/20100524023205/http://playstation2-linux.com:80/ (archived from the original) |
Linux for PlayStation 2 (or PS2 Linux) is a kit released by Sony Computer Entertainment in 2002 that allows the PlayStation 2 console to be used as a personal computer. It included a Linux-based operating system, a USB keyboard and mouse, a VGA adapter, a PS2 network adapter (Ethernet only), and a 40 GB hard disk drive (HDD). An 8 MB memory card is required; it must be formatted during installation, erasing all data previously saved on it, though afterwards the remaining space may be used for savegames. It is strongly recommended that a user of Linux for PlayStation 2 have some basic knowledge of Linux before installing and using it, due to the command-line interface for installation.
The official site for the project was closed at the end of October 2009[1] and communities like ps2dev[2] are no longer active. There is still a small group of enthusiasts that meets on Freenode in the channel #sps2.
Capabilities[edit]
The Linux Kit turns the PlayStation 2 into a full-fledged computer system, but it does not allow for use of the DVD-ROM drive except to read PS1 and PS2 discs due to piracy concerns by Sony. Although the HDD included with the Linux Kit is not compatible with PlayStation 2 games, reformatting the HDD with the utility disc provided with the retail HDD enables use with PlayStation 2 games but erases PS2 Linux, though there is a driver that allows PS2 Linux to operate once copied onto the APA partition created by the utility disc. The Network Adaptor included with the kit only supports Ethernet; a driver is available to enable modem support if the retail Network Adaptor (which includes a built-in V.90 modem) is used. The kit supports display on RGB monitors (with sync-on-green) using a VGA cable provided with the Linux Kit, or television sets with the normal cable included with the PlayStation 2 unit.
The PS2 Linux distribution is based on Kondara MNU/Linux, a Japanese distribution itself based on Red Hat Linux. PS2 Linux is similar to Red Hat Linux 6, and has most of the features one might expect in a Red Hat Linux 6 system. The stock kernel is Linux 2.2.1 (although it includes the USB drivers from Linux 2.2.18 to support the keyboard and mouse), but it can be upgraded to a newer version such as 2.2.21, 2.2.26 or 2.4.17.
Open-source applications[edit]
Contents of the Linux kit; the hard disk is already installed inside the machine, and the network adaptor is attached to the back.
The Linux kit's primary purpose is amateur software development, but it can be used as one would use any other computer, although the small amount of memory in the PS2 (32MB) limits its applications. Noted open source software that compiles on the kit includes Mozilla Suite, XChat, and Pidgin. Lightweight applications better suited to the PS2's 32MB of RAM include xv, Dillo, Ted, and AbiWord. The default window manager is Window Maker, but it is possible to install and use Fluxbox and FVWM. The USB ports of the console can be connected to external devices, such as printers, cameras, flash drives, and CD drives.
With PS2 Linux, a user can program their own games that will work under PS2 Linux, but not on an unmodified PlayStation 2. Free open source code for games are available for download from PS2 Linux support sites. There is little difference between PS2 Linux and the Linux software used on the more expensive system ('Tool', DTL-T10000) used by professional licensed PlayStation game programmers. Some amateur-created games are submitted to a competition such as the Independent Games Festival's annual competition. It is possible for an amateur to sell games or software that they develop using PS2 Linux, with certain restrictions detailed in the End User License Agreement. The amateur cannot make and sell game CDs and DVDs, but can sell the game through an online download.
Distribution[edit]
As of 2003, this kit is no longer officially sold in the US due to the entire allocation of NTSC kits being sold out, but it is available through import or through an auction site, such as eBay. Some incorrectly speculate it was used as an attempt to help classify the PS2 as a computer to achieve tax exempt status from certain EU taxes that apply to game consoles and not computers (It was the Yabasic included with EU units that was intended to do that).[citation needed] Despite this, Sony lost the case in June 2006. The kit was released in the spirit of the earlier Net Yaroze. PlayStation and Sony ended their support of hobbyist programmers with the support of Linux on the PlayStation 3 being discontinued.
Model compatibility[edit]
The original version of the PS2 Linux kit worked on only the Japanese SCPH-10000, SCPH-15000 and SCPH-18000 PlayStation 2 models. It came with a PCMCIA interface card which had a 10/100 Ethernet port and an external IDE hard drive enclosure (as there is no room inside the unit). This kit cannot be used with any later model PS2 (which includes all non-Japanese models) because these models removed the PCMCIA port.
Later versions of the PS2 Linux kit use an interface very similar to the HDD interface/Ethernet sold later for network play (the later released Network adaptor was also usable with the kit, including the built-in 56k modem.) This kit locates the hard drive internal to the PS2, in the MultiBay. With this kit, only the SCPH-30000 model of PlayStation 2 is officially supported. The kit does though work equally well with models newer than SCPH-30000 with the exception that the Ethernet connection tended to freeze after a short period of use. Thus the newer SCPH-50000 PlayStation 2 model will only work correctly with PS2 Linux with an updated network adapter driver, which must be transferred to the PlayStation 2 HDD by using either an older model PlayStation 2 to transfer the driver or a Linux PC with an IDE port. Both methods involve swapping HDDs. This is due to the inability to use USB Mass Storage devices with the relatively old kernel (version 2.2.1) shipped with the kit.
The slim SCPH-70000 PlayStation 2 model does not work with PS2 Linux at all, due to the lack of a hard drive interface, though a very few early models in this revision had solder pads of an IDE interface on the motherboard that could be used (but required modding of the console, thereby voiding its warranty.) Even so, it is possible to network boot from a PXE server.
PS2 Linux installation DVDs are region encoded, as are all other PS2 game discs. A European/PAL disc will be rejected by an NTSC PlayStation 2 game system; however this is only at boot time: if the user has a mod that allows them to load a PAL disk, then the PS2 Linux boot loader supports both PAL and NTSC Linux (read the documentation to determine the button presses), so once they are past the 'DVD not supported', they can boot Linux and then later start X Window in NTSC mode.
Unofficial support[edit]
Ever since the discontinuation of the PS2 Linux Kit and some time before that there has been a large, less active group who have tried and succeeded to run the Linux operating system through other methods, most notably using the KernelLoader Linux loader developed by Mega Man since 2008 where they have copied the necessary kernel files onto removable storage or DVDs formatted as Video DVDs due to Sony's anti-piracy efforts which restrict any data DVDs and loaded them through the program.
Through this method it has become possible to use custom Linux distros and other UNIX-like operating systems compiled for the PlayStation 2 and this has enabled users to use more compatible Linux kernels with smaller footprints and programs specially designed for the console. These methods often require the use of PS2 exploits such as Free MCBoot which allows the end user to boot from the PlayStation 2 memory card and launch custom made homebrew applications packaged as ELF files and other exploits such as SwapMagic etc. however these tend to void the warranty as some require the opening of the PlayStation 2 console itself.
See also[edit]
References[edit]
- ^https://web.archive.org/web/20100114201506/http://playstation2-linux.com/forum/forum.php?forum_id=1251
- ^'PS2DEV.ORG: Playstation Programming'. Archived from the original on February 2, 2008.
External links[edit]
- Sony's PlayStation 2 Linux Community Archived From The Original
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Linux_for_PlayStation_2&oldid=930759772'